Max M-K Modified Pneumatic Nailer
for fixing 20mm and 22mm
solid hardwood floors
Tool designed for accurate nail placement at a
45 degree angle.
The tool action will not cramp the board therefore
intermediate expansion allowances can be visually
pre-determined before nailing.
Effortless operation from a standing or kneeling
position.
Fitted with a countersink adjuster.
Operating pressure constant 7 bar (112 psi).
Air consumption - 1 litre per shot at 112 psi
= 150 nails per min, when run off MK2002 2 hp
compressor.
|
Nail With Complete Confidence
Flexi-J nail designed
to retain its strength and yet flex in sympathy
with the floor.
Specified by Junckers for
their Modular DIN & single batten sports and
dance floors.
Flexi-J nails are identified
by J mark on head.
Made from special heat-treated steel, phosphate
coated.
Annular ring shank for added holding power.
Short pointed to minimize wood spliting.
45mm and 50mm long x 2.2mm gauge, small head
Galvanised Standard floors
nails without J mark or heat treatment, ideal
for commercial and domestic 20mm and 22mm solid
hardwood floors.
Also suitable for face or tongue nailing softwood
T&G floorboards.
200 nails per plastic coil. The plastic sheet collation
passes through the tool and remains intact as each
nail is fired.
|
